 |
 |
 |
|
Click Here for Ordering Instructions and Shipping Information
|
|
|
|
 |
|
|
|
Toolholding/Workholding - Centers and Center Drivers - Riten
|
Riten Extra Heavy-Duty Live Centers - Standard Point
Click Here for more information or to order |
• Accuracy guaranteed to ±.0002"
• 3,000 Maximum RPM
• Designed for heavy steel rolls, paper rolls, printing rolls, castings, forgings and other large parts
• Also available in Jarno, brown & sharpe, and Straight Shanks
• Riten full service, repair and guarantee apply
• For use where the piece part may weigh several thousand pounds. Radial pressure and thrust requirements demand centers with bearing structures that will handle these loads
• MADE IN USA
|
|
Riten Face Drivers - Mounting Styles: - Complete Turning in One Operation
Click Here for more information or to order |
Riten Face Drivers, used in conjunction with Riten Live or Dead Centers, allow the complete turning or grinding of the entire outside diameter of a workpiece in a single operation. Even facing or chamfering of the ends of the part can be accomplished with the careful selection of the correct face driver and drive pins.
Unlike a chuck or grinding dog, a face driver grips and turns the part by locating only on the face of the workpiece. With a chuck or grinding dog, the part must be removed after the first operation, reversed and rechucked before any more operations can be performed. Traditional machining requires multiple operations and setups that increase costs and cycle times, and reduce part quality.
|
|
Riten Face Drivers - Riten Center Points
Click Here for more information or to order |
Selection Process:
1. Determine the driving diameter and mounting style to establish the correct face driver for the application.
2. Select drive pins. Determine part rotation (clockwise or counter-clockwise) and choose same type pins as face driver type.
3. Select center point. Determine center hole diameter and choose same type point as face driver type. |
|
|
|
Riten Face Drivers - Riten Drive Pins
Click Here for more information or to order |
Selection Process:
1. Determine the driving diameter and mounting style to establish the correct face driver for the application.
2. Select drive pins. Determine part rotation (clockwise or counter-clockwise) and choose same type pins as face driver type.
3. Select center point. Determine center hole diameter and choose same type point as face driver type. |
|
|
|
Riten Regal Live Centers - Long Point
Click Here for more information or to order |
• Accuracy guaranteed to ± .0001"
• 4,000 RPM
• Heavy-duty bearing design
• Points are through-hardened to 61 - 63 Rc
• Full length spindle for extra rigidity
• Triple row of angular contact bearings for superior performance. Double row in Models 2, 3 and 4
• Bodies are heat treated for additional strength
• Riten full service, repair, and guarantee apply |
|
|
|
Riten Regal Live Centers - Standard Point
Click Here for more information or to order |
• Accuracy guaranteed to ± .0001"
• Heavy-duty bearing design
• Points are through-hardened to 61 - 63 Rc
• Full length spindle for extra rigidity
• Double row of angular contact bearings for superior performance. Double row in Models 2, 3 and 4
• Bodies are heat treated for additional strength
• Riten full service, repair, and guarantee apply |
|
|
Servicing Industry Since 1968
About Us
National Supply Source
111 Leo Ave.
Syracuse, NY 13206
Phone: (315) 463-6241
Fax: (315) 463-0316
Have a Question or Need Technical Assistance? For Personal
Service Click Here
to contact a NSS dealer for your state.
|
|
